Laminate Scotia
Our market leading 18mm mdf scotia is available in our complete range of foil decors, designed to compliment any modern laminate floor. Standard 2.4m lengths are packed in tubes of 50, and are available from stock for next day delivery. Visit the ‘colour match’ section for a list of cross-references to the leading laminate flooring ranges.
All scotia decors are backed up with matching door plates, skirting boards and pipe covers.
Laminate Door Profiles & Trims
Our ranges of perfectly matching mdf door profiles and edge trims are stocked in every FC decor and are designed to compliment any laminate floor up to 10mm thick. All are finished with a hard-wearing protective coating, and stocked in both 1 metre and 3 metre lengths. All T, Ramp and End profiles are supplied with fitting channel and fixings.
All door profiles and trims are available in our latest laminate decors
T-Profile
PROFILE Laminate to laminate / carpet, threshold profile. For floor heights 6 – 10mm with durable wear resistant surface.
Ramp-Profile
Transition profile forms a Ramp from laminate to a tile or vinyl. For floor heights 6 – 10mm with durable wear resistant surface.
End-Profile
Versatile square cornered End Profile for finishing around vertical surfaces such as fireplaces & patio doors. Can be fitted against skirting as a contemporary alternative to scotia.
Laminate Skirting Boards and Architraves
A beautifully matched skirting board will help enhance the appearance of the laminate floor as well as adding an air of quality and class to a room. We manufacture skirting profiles in a range of shapes and sizes, including a 63mm version which can serve as a door architrave. All skirtings are manufactured in 2,4m lengths and are packed in 5’s.
4” Pencil Round
For a clean, contemporary profile, the 4” pencil round takes some beating. Available in all FC decors, can be glued or pinned for fast & economical fitting.
3” Torus/Architrave
A versatile profile which can be used as a small skirting or decorative trim, as well as a door architrave. Available in all FC decors, allowing a continuous run of matched profile around the doorway.
5/7” Torus/Architrave
A great traditional profile available in all FC decors to match any laminate floor. Stable and consistent, each 2.4m length is engineered to guarantee minimal waste.
Laminate UNISTAR Transition Profile
Using the same unique patented system as the Combistar, the Unistar combines remarkable flexibility with economy, for a truly versatile multi purpose transition profile.
Available in ALL of our FC laminate decors, including the very latest colours, the Unistar has a durable protective coating and is supplied with all necessary fixings.
900mm or 2700mm lengths, packed 5 lengths per tube.
Watch our installation video here: Watch video
Key Features & Benefits
- Combines a transition/ramp and levelling/ T profile
- Suitable for all modern floors; one profile for laminate, cork, tile, veneered, multi-layered and solid floors
- Transition for same level floor thickness from 7-21mm
- Mounting track can be screwed or glued down
- Compensates difference in floor heights up to 17mm
- Adapts automatically in height and inclination
- Profile easily reduced by cutting lower leg at groove
- Top profile clips easily into place, covering expansion gap up to 16mm
- Available in all FC decors, finished with hard wearing surface layer
Laminate Paintable Profiles
A great range of paintable profiles finished in a versatile white recoatable foil (decor ref FC14). This can be used untreated as a pure white surface, but it can also be painted on site as required. For a completely white room finish we can supply Unistar, T, Ramp and End profiles to match.
Please note that doorplates & end profiles have a wear-layer and are not recommended for recoating.
Scotia and skirting profiles are supplied in 2.4m lengths, with scotia tubed in 50’s and skirting packed in 5’s.
We can also produced customised profiles to your specification, subject to minimum order and lead time. Contact us for more information.
Laminate Pipe Covers
For the finishing touch to any laminate flooring installation, our new improved pipe surrounds are available in full range of FC decors, and now boast a SELF ADHESIVE backing! Supplied in packets of 4, these functional and economical trims can make all the difference to a job, as unsightly gaps around radiator pipes simply disappear. Just peel off the protective cover and stick down. Neat and easy!
Easy to fit, super flexible disc with self adhesive backing.
Laminate Unistep Stairnosing
The Unistep is a high quality HDF nosing profile designed to finish 7-8mm laminate flooring fitted to stairs and steps. Simple to use and economical, the Unistep is available in a growing range of hard wearing, abrasion resistant FC foils. It is designed to be glued into place using our powerful and fast-bonding adhesive, and is available in 1m, 2m or 3m lengths.
The Unistep multi-purpose foaming PU adhesive sets in minutes and can also be used to secure doorplates, skirting boards and even wooden flooring. Supplied in a 310ml cartridge for use with standard sealant guns.
The Unistep can also be supplied in a box set which contains 13 x 1m lengths along with 2 tubes of fast bond adhesive. Designed to save time and money, the Unistep box is a convenient pack that can be carried from trade counter to site easily and efficiently.
As the Unistep is not yet stocked in every FC colour, please check availability with us before ordering.
Unistep Stairnosing Colours Available:
Laminate Stairnosing Box Sets
The Unistep box set contains 13 one metre lengths of universal stairnosing profile, along with our incredible fast bond adhesive. Designed to save you time and money, the Unistep box is a smart package that can be carried from trade counter to site easily and efficiently.
No clumsy lengths, no waste, no fuss.
Unistep Multi-Purpose Foaming Adhesive
A fast bond foaming glue developed for use with the Unistep stairnosing. Bonds in minutes, can also be used on doorplates, skirting boards, carpet gripper, even wood flooring. 310ml cartridge fits standard sealant guns.